Allied Telesis AT-UWC Series - Manual (Page 126)

AT-UWC WLAN Controller Web GUI User’s Guide
126
VLAN Configuration
From the VLAN Configuration page, you can modify the properties of
VLAN’s, add and delete VLAN’s. You can modify, add, and delete single
VLAN or multiple VLAN’s at a time.
Modifying the
VLAN Properties
To modify the properties of VLAN, such as a VLAN name and tagging
status, do the following:
1. From the Navigation pane, go to Switching > VLAN > Configuration.
The VLAN Configuration page is displayed as shown in Figure 71.
Figure 71. VLAN Configuration Page
2. Specify the fields described in Table 34.
Table 34. VLAN Configuration
Field Description
VLAN ID List Select one of the following options from the select
list:
 1 - Modifies the properties of the default
VLAN.
 VLAN_ID: Modifies the properties of the
selected VLAN.
 Create - Moves to the page to add VLAN’s.
 Delete - Moves to the page to delete
VLAN’s.
VLAN Name Specifies the VLAN name. You cannot modify the
VLAN name of the default VLAN, which is VLAN 1.