Allied Telesis AT-UWC Series - Manual (Page 83)

Chapter 2: System
83
Reset Configuration To Default
From the Reset Configuration To Default page, you can restore the default
settings to the WLAN Controller.
Guidelines for
Resetting the
Configuration
Here are the guidelines when you reset the configuration to the default
settings:
 Since the IP address is reset to 192.168.1.1, you lose the
connection if the IP address was changed.
 The password for the manager account is reset to “friend.”
 Licenses are not deleted.
Resetting the
Configuration
To restore the default settings to the WLAN Controller system, do the
following:
1. From the Navigation pane, go to System > System Utilities > Reset
Configuration To Default.
The Reset Configuration To Default page is displayed as shown in
Figure 49.
Figure 49. Reset Configuration To Default Page
2. Click Reset.
The Confirm Reset Configuration To Defaults page is displayed.