Allied Telesis AT-UWC Series - Manual (Page 161)

Chapter 4: Security
161
CP Status
From the CP Status page, you can view the information about Captive
Portal on the WLAN Controller.
Viewing the CP
Global Status
To view the information about Captive Portal, do the following:
1. From the Navigation pane, go to System > Captive Portal > CP Status.
The CP Global Status page is displayed as shown in Figure 89.
Figure 89. CP Global Status Page
2. Observed the fields described in Table 49.
Table 49. CP Global Status
Field Description
CP Global
Operational
Status Displays the status whether Captive Portal is
enabled or disabled on the WLAN Controller.
CP Global
Disable Reason Displays the reason when Captive Portal is disabled
on the WLAN Controller. The options are:
 Administrator Disabled
 No IPv4 Address
 Routing Enabled, but no IPv4 routing
interface
 None - None of the above reasons is
applicable.
Supported Local
Users Displays the number of local users that are
supported in the local user database.
Configured Local
Users Displays the number of local users that are defined
to the WLAN Controller.