Allied Telesis AT-UWC Series - Manual (Page 122)

AT-UWC WLAN Controller Web GUI User’s Guide
122
3. If you want to refresh the display, click Refresh.
Adding License
Key
To add a license key, do the following:
1. From the Navigation pane, go to System > License > License.
The License Management page is displayed as shown in Figure 69 on
page 121.
2. Click Add Serial Number.
The Add Serial Number page is displayed as shown in Figure 70.
Figure 70. Add Serial Number Page
3. Enter your serial number and an authentication key.
The license key consists of a serial number and authentication key.
4. Click Submit.
Serial Number Displays the serial number of the registered license.
The license key consists of a serial number and an
authentication key.
Description Displays the name of the license key.
Remove Check the checkbox to remove the license key.
Table 33. License Management (Continued)
Field Description