Allied Telesis AT-UWC Series - Manual (Page 311)

Chapter 5: Wireless LAN
311
3. Click Add.
The VLAN is added to the VLAN List.
4. Click the following buttons:
 Refresh — Refreshes the display on this page.
 Submit — Makes the changes effective and saves them to the
running configuration file.
Note
To save your changes to the startup configuration file, see “Save All
Applied Changes” on page 39.
Deleting VLAN’s
to the List
To delete a VLAN for Centralized L2 Tunneling from the list, do the
following:
1. From the Navigation pane, go to WLAN > Advanced Configuration >
Global and click the Centralized Tunneling tab.
The Centralized L2 Tunneling Configuration page is displayed as
shown in Figure 153 on page 310.
2. Select a VLAN that you want to delete in the VLAN List.
3. Click Delete.
The VLAN is deleted from the VLAN List.
4. Click the following buttons
 Refresh — Refreshes the display on this page.
 Submit — Makes the changes effective and saves them to the
running configuration file.
Note
To save your changes to the startup configuration file, see “Save All
Applied Changes” on page 39.