Allied Telesis AT-UWC Series - Manual (Page 118)

AT-UWC WLAN Controller Web GUI User’s Guide
118
3. Click Submit.
Address /
Hostname Enter the IPv4 address or host name of the SNTP
server, depending on the address type selected
below.
Address Type Select one of the following types:
IPv4: Specifies the SNTP server with its IPv4
address.
DNS: Specifies the SNTP server with its host
name.
Port Specify the UDP port number used to send time
requests in the unicast mode and receive broadcasts
in the broadcast mode. The default port number is
123.
Priority Specify the priority of the SNTP server. When the
SNTP client has more than one SNTP server
registered, it sends requests to an SNTP server
based on the priority number.
An SNTP server with a smaller priority number has a
higher priority. When multiple SNTP servers have the
same priority, the first listed SNTP server list.
Version Specify the version of the SNTP server.
Table 31. SNTP Server Configuration (Continued)
Field Description