Allied Telesis AT-UWC Series - Manual (Page 204)

AT-UWC WLAN Controller Web GUI User’s Guide
204
AP Management Reset
From the Managed AP (Access Point) Reset page, you can reboot the
selected access points.
To reboot access points, do the following:
1. From the Navigation pane, go to WLAN > AP Management > Reset.
The Managed AP Reset page is displayed as shown in Figure 108.
Figure 108. Managed AP Reset Page
2. Check the checkbox next to the MAC address of the access point that
you want to reboot.
3. Click the following buttons:
 Reset — Reboots the selected access points.
 Reset All — Reboots all the access points on the list.
 Refresh — Refreshes the display on this page.