Allied Telesis AT-UWC Series - Manual (Page 58)

AT-UWC WLAN Controller Web GUI User’s Guide
58
3. Click one of the following buttons:
 Refresh — Refreshes the display on this page.
 Submit — Saves the changes to the running configuration file.
Note
To save your changes to the startup configuration file, see “Save All
Applied Changes” on page 39.
Table 8. Buffered Log Configuration
Field Description
Admin Status Starts or stops logging messages. The options are:
 Enable: Starts logging messages into the
buffer.
 Disable: Stops logging messages into the
buffer.
Behavior Specifies the logging behavior. The options are:
 Wrap: Replaces the last saved messages
with new messages when the buffer is full.
 Stop on Full: Stops logging when the buffer
is full.