Allied Telesis AT-UWC Series - Manual (Page 39)

Chapter 2: System
39
Save All Applied Changes
From the Save All Applied Changes page, you can save all the changes
you have made to the startup configuration file. When you save your
changes to the startup configuration file, the changes are effective after
the system reboots.
Note
When you click Submit on each page, you save your changes on
the page to the running configuration file. The changes are effective
immediately; however, when the system is reset, the changes are
lost.
To save all the changes to the startup configuration file, do the following:
1. From the Navigation pane, go to Save All Applied Changes.
The Save All Applied Changes page is displayed as shown in
Figure 25.
Figure 25. Save All Applied Changes Page
2. Click Save.