Allied Telesis AT-UWC Series - Manual (Page 54)

AT-UWC WLAN Controller Web GUI User’s Guide
54
Forwarding Database Configuration
From the Forwarding Database Configuration page, you can change the
aging interval for the forwarding database. A forwarding database is also
called a MAC address table that Layer 2 devices keep to associate MAC
addresses to the ports.
To change the aging interval for the forwarding database, do the following:
1. From the Navigation pane, go to System > Forwarding Database >
Configuration.
The Forwarding Database Configuration page is displayed as shown
in Figure 33.
Figure 33. Forwarding Database Configuration Page
2. Specify the aging interval in seconds.
The aging interval is the number of seconds the entry of a MAC
address is kept in the forwarding database. The default is 300
seconds.
3. Click Submit.
The change is saved to the running configuration file.
Note
To save your changes to the startup configuration file, see “Save All
Applied Changes” on page 39.