Allied Telesis AT-UWC Series - Manual (Page 261)

Chapter 5: Wireless LAN
261
4. If you want to refresh the display, click Refresh.
Viewing the
Status of
Distributed
Tunneling
To view the information about the distributing tunnels on the AP client, do
the following:
1. From the Navigation pane, go to WLAN > Status/Statistics >
Associated Client and click the Distributed Tunneling subtab.
2. Select the MAC address of the AP client from the select list.
The Associated Client Status Distributed Tunneling page is displayed.
3. Observe the fields described in Table 101.
Discovery
Reason Displays how the access point was discovered. The
options are:
 RF Scan
 Probe Request - The access point
received probe requests from the AP client.
 Associated to Managed AP - The AP client
is associated with the access point.
 Associated to Peer AP - The AP client is
associated with the access point managed
by the peer controller.
 Ad Hoc Rogue - The access point detected
the AP client on the ah hoc network.
Multiple reasons can be displayed at a time.
Table 100. Associated Client Status Neighbor APs (Continued)
Field Description
Table 101. Associated Client Status Distributed Tunneling
Field Description
Distributed
Tunneling Status Displays whether or not the AP client is associated
with the wireless network that supports distributed
tunneling.