Allied Telesis AT-UWC Series - Manual (Page 279)

Chapter 5: Wireless LAN
279
Status Displays the status of the access point. The options
are:
 Managed - An access point managed by
the WLAN Controller
 Standalone - An access point on the Valid
AP list of the WLAN Controller
 Rogue - An access point classified as an
threat by WIDS
 Unknown - An access point classified not
as rogue by WIDS
Initial Status Displays the initial status of the access point that is
later classified as rogue. The options are:
 Managed
 Standalone
 Unknown
The initial status is the same as status for access
points that are not rogue.
Transmit Rate Displays the transmit rate of the access point.
WIDS Rogue AP
Mitigation Displays the reason why the mitigation is not
applied. The mitigation is a feature to reduce the
risks.The options are:
 Not Required
 Already mitigating too many APs
 AP is operating on an illegal channel
 AP is spoofing valid managed AP MAC
address.
 AP is ad hoc.
Age Displays the time period since last RF scan by
which the access point was detected.
Discovered Age Displays the time period since first RF scan by
which the access point was detected.
BSSID Displays the BSSID in the beacon frames from the
access point.
Physical Mode Displays the IEEE 802.11 mode that the access
point is using.
Table 115. Access Point RF Scan Status Detail (Continued)
Field Description