Allied Telesis AT-UWC Series - Manual (Page 165)

Chapter 4: Security
165
5. If you want to view the most current information, click Refresh.
Viewing the
Interface
Capability Status
To view the information about each wireless network interface, do the
following:
1. From the Navigation pane, go to Security > Captive Portal > Interface
Status.
The Interface Capability Status page is displayed as shown in Figure
91 on page 164.
2. Click the Interface Capability Status tab.
The Interface Capability Status page is displayed as shown in
Figure 92.
Figure 92. Interface Capability Status Page
3. Observe the fields described in Table 52 on page 166.
Blocked Status Displays the CP blocking status. The options are:
 Block - Users cannot access the network via
Captive Portal authentication.
 Unblock - Users can access the network via
Captive Portal authentication.
Authenticated
Users Displays the number of users that are currently
authenticated in all the CP instances.
Table 51. Interface Activation Status (Continued)
Field Description