Allied Telesis AT-UWC Series - Manual (Page 241)

Chapter 5: Wireless LAN
241
4. Observe the fields described in Table 88.
5. Click the following buttons as needed:
 Delete All Neighbors — Deletes all the entires on the Managed
Access Point Neighbor AP Status and Managed Access Point
Neighbor Client Status pages.
 Refresh — Refreshes the display on this page.
Viewing the
Status of Virtual
Access Points
To view the information about Virtual Access Points (VAP), do the
following:
1. From the Navigation pane, go to WLAN > Status/Statistics > Managed
AP and clicked the VAP subtab.
The Managed Access Point VAP Status page is displayed as shown in
Figure 125 on page 242.
Table 88. Managed Access Neighbor Client Status
Field Description
Neighbor Client
MAC Displays the MAC address of a neighbor AP client.
RSSI Displays the RSSI of the neighbor AP client.
Channel Displays the channel of the access point that
received frames from the AP client.
Discovery
Reason Displays how the AP client was discovered. The
options are:
 RF Scan Discovered
 Probe Request
 Associated to Managed AP
 Associated to this AP
 Associated to Peer AP
 Ad Hoc Rogue
Multiple reasons can be displayed at a time.
Age Displays the time period since the neighbor AP
client was detected through the RF scan.