Allied Telesis AT-UWC Series - Manual (Page 63)

Chapter 2: System
63
Hosts Log Configuration
From the Hosts Log Configuration page, you can add Syslog servers.
Note
To start or stop sending log messages to Syslog servers, see
“Syslog Configuration” on page 69.
To add a Syslog server, do the following:
1. From the Navigation pane, go to System >> Logs > Hosts Log
Configuration.
The Hosts Log Configuration page is displayed as shown in Figure 38.
Figure 38. Hosts Log Configuration Page
2. Select the options in the fields described in Table 9.
Table 9. Hosts Log Configuration
Field Description
Host Displays the action. Add is the only option.
IP Address
Hostname Specifies an IPv4 address or host name of the
Syslog server where log messages are sent.