Allied Telesis AT-UWC Series - Manual (Page 200)

AT-UWC WLAN Controller Web GUI User’s Guide
200
The Valid Access Point Summary page is displayed as shown in
Figure 105 on page 199.
2. Specify the fields described in Table 70.
3. Click Add.
The Valid Access Point Configuration page is displayed as shown in
Figure 106.
Figure 106. Valid Access Point Configuration Page
4. Specify the fields described in Table 71.
Table 70. Valid Access Point Summary (Adding)
Field Description
MAC Address Specify the MAC address of the access point.
Location Specify the location information of the access
point. This is optional. The location can be up to 32
alphanumeric characters.
Table 71. Valid Access Point Configuration
Field Description
MAC Address Displays the MAC address of an access point.