Allied Telesis AT-UWC Series - Manual (Page 73)

Chapter 2: System
73
SNMP Community Configuration
From the SNMP Community Configuration page, you can view a list of
community strings, modify the properties of a community string, add a
community string, and delete it. A community string acts as a password to
access the SNMP service.
Adding or
Modifying
Community
Strings
To add or modify community strings, do the following:
1. From the Navigation pane, go to System > SNMP > Community
Configuration.
The SNMP Community Configuration page is displayed as shown in
Figure 43.
Figure 43. SNMP Community Configuration Page
2. Select and specify the following fields in Table 13.
. Table 13. SNMP Community Configuration
Field Description
Community Specifies the name of a community string or the
action. The options are:
 Create - Adds a new community string.
 public - Modifies the properties of the
community public.
 private - Modifies the properties of the
community private.
Community Specifies the name of new community. This field is
displayed only when Create is selected.