Allied Telesis AT-UWC Series - Manual (Page 292)

AT-UWC WLAN Controller Web GUI User’s Guide
292
The Detected Client Status Detail page is displayed as shown in
Figure 144 on page 286.
3. Click the Triangulation tab.
The Detected Client Triangulation page is displayed as shown in
Figure 146.
Figure 146. Detected Client Triangulation Page
4. Observe the fields described in Table 122.
Table 122. Detected Client Triangulation
Field Description
Detected Client
MAC Address Displays the MAC address of the AP client.
Sentry Displays the sentry mode of the access point that
detected the AP client. The options are:
 Sentry
 Not Sentry
MAC Address Displays the MAC address of the access point that
detected the AP client.
Radio Displays the radio band of the wireless network
interface.
RSSI (%) Displays Received Signal Strength Indication
(RSSI) of the non-sentry AP in percentage. RSSI is
a measurement of the power represent in a
received radio signal.
Signal Strength
(dBm) Displays Received Signal Strength Indication
(RSSI) of the non-sentry access point in dBm.