Allied Telesis AT-UWC Series - Manual (Page 105)

Chapter 2: System
105
3. If you want to refresh the display, click Refresh.
Enabling the DNS
Client
To enable or disable the DNS client on the WLAN Controller, do the
following:
1. From the Navigation pane, go to System > DNS > Global
Configuration.
The DNS Global Configuration page is displayed as shown in Figure
60 on page 104.
2. Select Enable or Disable from the Admin Mode select list:
3. Click Submit.
Changing the
Properties
To change the properties, do the following:
1. From the Navigation pane, go to System > DNS > Global
Configuration.
The DNS Global Configuration page is displayed as shown in Figure
60 on page 104.
2. Specify the following fields described in Table 25.
 Default Domain Name
 Retry Number
 Response Timeout (secs)
3. Click Submit.
Adding a DNS
Name
To add a DNS name to the list, do the following:
1. From the Navigation pane, go to System > DNS > Global
Configuration.
Retry Number Displays the number of times that the DNS client tries
to resolve a host name. The default setting is 2 times.
Response
Timeout (secs) Displays the time period in seconds the DNS client
waits for a response. The default setting is 3 seconds.
Domain List Displays a list of domain names added to the WLAN
Controller.
Remove Check the checkbox to delete the domain name.
Table 25. DNS Global Configuration (Continued)
Field Description