Allied Telesis AT-UWC Series - Manual (Page 187)

Chapter 4: Security
187
Secure HTTP
On the Secure HTTP (HTTPS) Configuration page, you can enable or
disable HTTPS, modify the properties for HTTPS connections, generate a
certificate, and delete a certificate.
To modify HTTPS settings, do the following:
1. From the Navigation pane, go to Security > Secure HTTP >
Configuration.
The Secure HTTP Configuration page is displayed as shown in
Figure 101.
Figure 101. Secure HTTP Configuration Page
2. Modify the property settings described in Table 65.
Table 65. HTTPS Configuration
Field Description
HTTPS Admin
Mode Enables or disables HTTPS. By default, HTTPS is
disabled and HTTP is enabled. See “HTTP” on
page 47.
TLS Version 1 Enable or disable TLS Version 1. By default, the
TLS Version 1 is enabled.