Allied Telesis AT-UWC Series - Manual (Page 349)

Chapter 5: Wireless LAN
349
Table 144. Peer Controller Configuration Enable/Disable
Field Description
Global Check the checkbox to specify the Global
configuration of the WLAN Controller to be
downloaded to the peer controllers. The Global
configuration does not include the IP address of the
controller.
See “WLAN Basic Setup > Global” on page 191
and “WLAN Advanced Configuration > Global” on
page 302.
Discovery Check the checkbox to specify the Discovery
configuration of the WLAN Controller to be
downloaded to the peer controllers. The IP list of
the wireless discovery must include the IP
addresses of the WLAN Controller and the peer
controllers that receive the configuration request.
See “WLAN Basic Setup > Discovery” on
page 194.
Channel/Power Check the checkbox to specify the Channel /Power
configuration of the WLAN Controller to be
downloaded to the peer controllers.
See “RF Management > Configuration” on
page 205.
AP Database Check the checkbox to specify the valid AP
configuration of the WLAN Controller to be
downloaded to the peer controllers.
See “WLAN Basic Setup > Valid AP” on page 198.
AP Profiles Check the checkbox to specify the AP profile
configuration of the WLAN Controller to be
downloaded to the peer controllers. The AP profile
configuration includes the Global, Radio, VAP, and
QoS settings.
See “Access Point Profile List” on page 325.
Known Client Check the checkbox to specify the Known Client
configuration of the WLAN Controller to be
downloaded to the peer controllers.
See “WLAN Advanced Configuration > Known
Client” on page 312.