Allied Telesis AT-UWC Series - Manual (Page 159)

Chapter 4: Security
159
Interface Association
From the Interface Association page, you can view a list of wireless
network interfaces or Service Set Identifiers (SSID’s) that are associated
to a CP profile. You can also associate a CP profile to a wireless network
interface and delete an associated wireless network interface from a CP
profile.
Guidelines for
Associating a CP
Profile
Here are the guidelines for associating a CP profile to a wireless network
interface:
 You can associate one CP profile with multiple wireless network
interfaces; however, one wireless network interface can be
associated with only one CP profile.
 The wireless network interfaces that use Captive Portal must be
assigned to the same VLAN ID as the management VLAN of the
WLAN Controller.
Adding and
Deleting Wireless
Networks from a
CP Profile
To associate a CP profile to wireless network interfaces or delete an
associated wireless network interface form a CP profile, do the following:
1. From the Navigation pane, go to Security > Captive Portal > Interface
Association.
The Interface Association page is displayed as shown in Figure 88.
Figure 88. Interface Association Page
2. Specify the fields described in Table 48.
Table 48. Interface Association
Field Description
CP Configuration Select one of the CP profiles from the select list.