Allied Telesis AT-UWC Series - Manual (Page 168)

AT-UWC WLAN Controller Web GUI User’s Guide
168
 Delete — Deletes the selected AP client.
 Delete All — Deletes all the AP clients.
 Refresh — Refreshes the display on this page.
Client Detail
To view the detailed information about connected AP clients, do the
following:
1. From the Navigation pane, go to Security > Captive Portal > Client
Connection Status.
The Client Summary page is displayed.
2. Click the Client Detail tab.
The Client Detail page is displayed.
3. Observed the fields described in Table 54.
Table 54. Client Detail
Field Description
Client IP Address Displays the IP Address of the AP client.
CP Configuration Displays the CP profile that the AP client is currently
using.
Protocol Displays the protocol that is connected through:
HTTP or HTTPS.
Session Time Displays the time period since the AP client was
authenticated.
Controller Type Displays the type of the WLAN Controller that
authenticates the AP client: Local or Peer.
User Name Displays the user name or guest ID of the connected
AP client.
Interface Displays the interface that the AP client is using.
Verification Displays the account type. The options are:
 Guest
 Local
 RADIUS
Controller MAC
Address Displays the MAC address of the WLAN Controller
that authenticated the AP client. When clustering is
supported, the MAC address of the peer controller
may be shown.