Allied Telesis AT-UWC Series - Manual (Page 175)

Chapter 4: Security
175
RADIUS Server Configuration
From the RADIUS Server Configuration page, you can add a RADIUS
server to the WLAN Controller.
To view and modify the network interface properties, do the following:
1. From the Navigation pane, go to Security > RADIUS > Server
Configuration.
The RADIUS Server Configuration page is displayed as shown in
Figure 94.
Figure 94. RADIUS Server Configuration Page
2. Specify the fields described in Table 59.
3. Click Submit.
Note
To save your changes to the startup configuration file, see “Save All
Applied Changes” on page 39.
Table 59. RADIUS Server Configuration
Field Description
RADIUS Server Host
Address Displays the action. Add is the only option.
RADIUS Server Host
Address Specify the IPv4 address of The RADIUS
server.
RADIUS Server Name Specify the name of the RADIUS server.