Allied Telesis AT-UWC Series - Manual (Page 319)

Chapter 5: Wireless LAN
319
RADIUS
Authentication
Server Status Displays the configuration status of a RADIUS
authentication server.
RADIUS
Accounting
Server Name Specify the name of RADIUS server for accounting.
When the RADIUS Use Network Configuration on
the page is enabled, this RADIUS server overrides
the setting in the WLAN Basic Setup page. See
“WLAN Basic Setup > Global” on page 191.
You must use the server name as it was added to
the RADIUS Named Server list. See “Accounting
Server Configuration” on page 181.
The WLAN Controller performs RADIUS
transactions in behalf of access points and AP
clients.
RADIUS
Accounting
Server Status Displays the configuration status of a RADIUS
accounting server.
RADIUS Use
Network
Configuration Select which RADIUS server the WLAN Controller
refers to. The options are:
 Enable - The RADIUS servers that
configured on this page override the setting
on the WLAN Basic Setup page.
 Disable - The RADIUS servers that
configured on the WLAN Basic Setup page
overrides the setting on this page.
RADIUS
Accounting Check the checkbox to enable RADIUS accounting
for the WLAN Controller.
Security Select the security options on the wireless network.
The options are:
 None - Any AP client can access to the
access points in the network. The messages
between the access points and AP clients
are not encrypted.
 WEP - Expands the page to include the
WEP settings.
 WPA/WPA2 - Expands the page to include
the WPA/WPA2.
Table 134. Wireless Network Configuration (Continued)
Field Description