Allied Telesis AT-UWC Series - Manual (Page 215)

Chapter 5: Wireless LAN
215
Managed AP Advanced Settings
From the Managed AP Advanced Settings page, you can view AP
advanced settings, change the debug status, channel, and power level.
Viewing the AP
Advanced
Settings
To view the AP advanced settings, do the following:
1. From the Navigation pane, go to WLAN > AP Management >
Advanced Settings.
The Managed AP Advanced Settings page is displayed as shown in
Figure 113.
Figure 113. Managed AP Advanced Settings Page
2. Observe the fields described in Table 77.
Table 77. Managed AP Advanced Settings
Field Description
MAC address Displays the MAC address of the access point.
Location Displays the location information of the access point.
Debug Displays the status of accessing the access point
through the Web GUI. The options are:
 Disabled - You cannot access the access
point through the Web GUI.
 Set Requested - The request is made.
 Set in Progress - The request is in progress.
 Enabled - You can access the access point
through the Web GUI.
Radio Displays the RF band of the access point.