Allied Telesis AT-UWC Series - Manual (Page 364)

AT-UWC WLAN Controller Web GUI User’s Guide
364
WDS AP Configuration
From the WDS AP Configuration page, you can view access point
members that belong to a WDS group and add a new access point
member.
Viewing a List of
AP Members and
Adding an AP
To view access point members that belong to a WDS group and add a
new access point member, do the following:
1. From the Navigation pane, go to WLAN > WDS Configuration > AP
Configuration.
The WDS AP Configuration page is displayed as shown in Figure 174.
Figure 174. WDS AP Configuration Page
2. Select a WDS group ID to view its access point members from the
select list.
A list of MAC addresses of the access points that belong to the
selected WDS group is displayed.
3. Click Add to add a new access point member.
Another WDS AP Configuration page is displayed as shown in Figure
175 on page 365.