Allied Telesis AT-UWC Series - Manual (Page 362)

AT-UWC WLAN Controller Web GUI User’s Guide
362
Figure 173. WDS Group Configuration Page 2
5. Check the Edit checkbox.
You can enter a password in the WDS Group Password field.
6. Enter the same password as the WDS group password for the satellite
AP.
7. Click Submit.
8. From the Navigation pane, go to WLAN > WDS Configuration > Group
Configuration.
The WDS Group Configuration page is displayed as shown in Figure
172 on page 361.
9. Click Push Config.
The information about WDS on WLAN Controller is pushed to other
peer controllers.
Deleting WDS
Groups
To delete WDS groups from the list, do the following:
1. From the Navigation pane, go to WLAN > WDS Configuration > Group
Configuration.
The WDS Group Configuration page is displayed as shown in Figure
172 on page 361.
2. Check the checkbox of the WDS group to delete.
3. Click Delete.
4. If you want to refresh the displays on this page, click Refresh.