Allied Telesis AT-UWC Series - Manual (Page 157)

Chapter 4: Security
157
4. Click the following buttons as needed:
 Refresh — Refreshes the display on this page.
 Delete — Deletes the local user.
 Submit — Makes the changes effective and saves them to the
running configuration file.
Note
To save your changes to the startup configuration file, see “Save All
Applied Changes” on page 39.
Deleting a Local
User
To delete a local user, do the following:
1. From the Navigation pane, go to Security > Captive Portal > Local
User.
The Local User Summary page is displayed as shown in Figure 86 on
page 155.
2. Check the checkbox of the user that you want to delete.
Session Timeout
(secs) Specify the time period in seconds to allow a user to
stay connected. When Session Timeout has
passed, the user is automatically logged out.
Max Up Rate
(bytes/sec) Specify the maximum transmission rate that AP
clients send traffic to the network when Captive
Portal is activated.
Max Down Rate
(bytes/sec) Specify the maximum receiving rate that AP clients
receive traffic from the network when Captive Portal
is activated.
Max Receive
(bytes) Specify the maximum size in bytes to allow AP
clients to send to the access point when Captive
Portal is activated. When the maximum size is
exceeded, the AP client is disconnected.
Max Transmit
(bytes) Specify the maximum size in bytes to allow AP
clients to receive from the access point when
Captive Portal is activated. When the maximum
size is exceeded, the AP client is disconnected.
Max Total (bytes) Specify the maximum total size in bytes to allow AP
clients to send and receive when Captive Portal is
activated. The maximum total size is exceeded, the
AP client is disconnected.
Table 47. Local User Configuration (Continued)
Field Description