Allied Telesis AT-UWC Series - Manual (Page 94)

AT-UWC WLAN Controller Web GUI User’s Guide
94
Software Upgrade
From the Software Upgrade page, you can upgrade management
software from your management workstation to the WLAN Controller.
Note
After downloading management software, you must reset the WLAN
Controller to load the software. See “System Reset” on page 82.
Guideline for
upgrading
Management
Software
Here are the guidelines for upgrading management software
 After downloading management software, you must reboot the
WLAN Controller to load the software. See “System Reset” on
page 82.
 The startup configuration stays the same after the system was
upgraded.
 You cannot install older versions of software.
 The file name of the management software is not allowed to
include space or symbols.
Upgrading
Management
Software
To download management software, do the following:
1. From the Navigation pane, go to System > System Utilities > Software
Upgrade.
The Software Upgrade page is displayed as shown in Figure 55 on
page 95.