Allied Telesis AT-UWC Series - Manual (Page 361)

Chapter 5: Wireless LAN
361
Viewing a List of
WDS Groups and
Adding a New
Group
To view a list of WDS groups and add a WDS group, do the following:
1. From the Navigation pane, go to WLAN > WDS Configuration > Group
Configuration.
The WDS Group Configuration page is displayed as shown in
Figure 172.
Figure 172. WDS Group Configuration Page
2. Observe the following fields described in Table 148.
3. Enter a name of the WDS group to add.
4. Click Add.
Another WDS Group Configuration page is displayed as shown in
Figure 173 on page 362.
Table 148. WDS Group Configuration
Field Description
ID Displays the ID of the WDS group.
Group Name Displays the name of the WDS group.