Allied Telesis AT-UWC Series - Manual (Page 176)

AT-UWC WLAN Controller Web GUI User’s Guide
176
RADIUS Named Server Status
From the RADIUS Named Server Status page, you can view a list of
configured RADIUS servers on the WLAN Controller.
To view a list of configured RADIUS servers, do the following:
1. From the Navigation pane, go to Security > RADIUS > Named Server
Status.
The RADIUS Named Server Status page is displayed as shown in
Figure 95.
Figure 95. RADIUS Named Server Status Page
2. Observed the fields described in Table 60.
Table 60. RADIUS Named Server Status
Field Description
Current Displays the current mode of the RADIUS server.
The options are:
 True- indicates that the RADIUS server is
currently used.
 False - indicates that the RADIUS server is a
backup server.
RADIUS Server
IP Address Displays the IPv4 address of the current RADIUS
server.
RADIUS Server
Name Displays the name of the RADIUS server. More than
one RADIUS server can have the same server
name. The RADIUS client can use a server with the
same name as a backup server.