Allied Telesis AT-UWC Series - Manual (Page 138)

AT-UWC WLAN Controller Web GUI User’s Guide
138
CP Global Configuration
From the Captive Portal (CP) Global Configuration page, you can enable
Captive Portal, view and modify the CP global configuration on the WLAN
Controller.
Captive Portal is the feature that blocks AP clients from accessing the
network until the AP clients are authenticated. Captive Portal also directs
the user of the AP clients to the authentication web page when the AP
clients send the first HTTP or HTTPS packets.
To enable Captive Portal, view, and modify the CP global configuration, do
the following:
1. From the Navigation pane, go to Security > Captive Portal > Global
Configuration.
The CP Global Configuration page is displayed as shown in Figure 78.
Figure 78. CP Global Configuration Page
2. Observe or specify the fields described in Table 38.
Table 38. CP Global Configuration
Field Description
Enable Captive
Portal Check the checkbox to enable Captive Portal.
CP Global
Operational Status Displays the status of Captive Portal on the WLAN
Controller. The options are:
 Enabled
 Disabled