Allied Telesis AT-UWC Series - Manual (Page 57)

Chapter 2: System
57
Buffered Log Configuration
From the Buffered Log Configuration page, you can enable or disable the
Buffered Log function. The system stores up to 200 log messages in the
buffer and deletes them when the system shuts down.
Note
To download buffered log messages, see “Upload File from
Controller” on page 90.
To enable or disable the buffered log function, do the following:
1. From the Navigation pane, go to System > Logs > Buffered Log
Configuration.
The Buffered Log Configuration page is displayed as shown in
Figure 35.
Figure 35. Buffered Log Configuration Page
2. Select the options in the fields described in Table 8 on page 58.