Allied Telesis AT-UWC Series - Manual (Page 328)

AT-UWC WLAN Controller Web GUI User’s Guide
328
Access Point Profile Global Configuration
From the Access Point (AP) Profile Global Configuration page, you can
modify the properties of an access point profile.
To modify the properties of an AP profile, do the following:
1. From the Navigation pane, go to WLAN > Advanced Configuration >
AP Profiles.
The Access Point Profile List page is displayed as shown in Figure 161
on page 325.
2. Take one of the following actions:
 “Viewing and Adding Access Point Profiles” on page 325
 “Copying An Access Point Profile” on page 326
 “Modifying An Access Point Profile” on page 327
The Access Points Profile Global Configuration page is displayed as
shown in Figure 162.
Figure 162. Access Point Profile Global Configuration Page
3. Modify the fields described in Table 138 on page 329.