Allied Telesis AT-UWC Series - Manual (Page 191)

Chapter 5: Wireless LAN
191
WLAN Basic Setup > Global
From the Wireless Global Configuration page, you can enable or disable
the WLAN Controller. You can also view and modify the basic settings.
To enable or disable the WLAN Controller, view, and modify the basic
settings, do the following:
1. From the Navigation pane, go to WLAN > Basic Setup.
The Wireless Global Configuration page is displayed as shown in
Figure 102.
Figure 102. Wireless Global Configuration Page
2. Observe and modify the settings described in Table 66.
Table 66. Wireless Global Configuration
Field Description
Enable WLAN
Controller Check the checkbox to enable the WLAN
Controller.