Allied Telesis AT-UWC Series - Manual (Page 242)

AT-UWC WLAN Controller Web GUI User’s Guide
242
Figure 125. Managed Access Point VAP Status Page
2. Select the MAC address of the access point that you want to view the
Virtual Access Points.
3. Select the radio band: 802.11b/g/n or 802.11a/n.
The VAP information on the selected access point is displayed.
4. Observe the fields described in Table 89 on page 242.
5. If you want to refresh the display, click Refresh.
Viewing the
Status of
Distributed
Tunneling
To view the information about distributed tunneling, do the following:
1. From the Navigation pane, go to WLAN > Status/Statistics > Managed
AP and clicked the Distributed Tunneling subtab.
Table 89. Managed Access VAP Status
Field Description
VAP ID Displays the VAP identification number. The range
is 0 to 15.
VAP Mode Displays the VAP mode: enabled or disabled.
BSSID Displays the MAC address of the VAP.
SSID Displays the wireless network that is assigned to
the VAP.
Client
Authentication Displays the number of the AP clients that are
currently authenticated by the VAP.