Allied Telesis AT-UWC Series - Manual (Page 167)

Chapter 4: Security
167
Client Connection Status
From the Client Connection Status page, you can view the information
about connected AP clients. You can also disconnect the AP clients from
the page.
You can visit 5 pages from the Client Connection Status page:
 Client Summary page
 Client Detail page
 Client Statistics page
 Interface - Client Status page
 CP - Client Status page
Client Summary
To view the information about connected AP clients, do the following:
1. From the Navigation pane, go to Security > Captive Portal > Client
Connection Status.
The Client Summary page is displayed.
2. Observe the fields described in Table 53.
3. Click the following buttons as needed:
Table 53. Client Summary
Field Description
MAC Address Displays the MAC address of the AP client. When the
* symbol is marked at the end of the MAC address,
the AP client was authenticated by the peer
controller.
IP Address Displays the IP address of the AP client.
User Displays the user name or guest ID of the connected
AP client.
Protocol Displays the protocol that is connected through:
HTTP or HTTPS.
Verification Displays the account type. The options are:
 Guest
 Local
 RADIUS