Allied Telesis AT-UWC Series - Manual (Page 339)

Chapter 5: Wireless LAN
339
Access Point Profile VAP Configuration
From the Access Point Profile Virtual Access Point (VAP) Configuration
page, you can associate VAP’s with the access point profile. You can also
go to the Wireless Network Configuration page to edit each VAP.
To associate VAP’s to the access point profile, do the following:
1. From the Navigation pane, go to WLAN > Advanced Configuration >
AP Profiles.
The Access Point Profile List page is displayed as shown in Figure 161
on page 325.
2. Take one of the following actions:
 “Viewing and Adding Access Point Profiles” on page 325
 “Copying An Access Point Profile” on page 326
 “Modifying An Access Point Profile” on page 327
The Access Points Profile Global Configuration page is displayed as
shown in Figure 162 on page 328.
3. Click the VAP tab.
The Access Points Profile VAP Configuration page is displayed as
shown in Figure 164 on page 340.