Allied Telesis AT-UWC Series - Manual (Page 258)

AT-UWC WLAN Controller Web GUI User’s Guide
258
3. If you want to disconnect an AP client, check the checkbox next to the
MAC address of the AP client.
4. Click the following buttons as needed:
 Disassociate — Disconnect the selected AP client from the
access point.
 Disassociate All — Disconnected all the AP clients from the
access point.
 Refresh — Refreshes the display on this page.
Viewing the
Detailed Status
To view the detailed information about the access point and AP clients and
disassociate an AP client, do the following:
1. From the Navigation pane, go to WLAN > Status/Statistics >
Associated Client and click the Detail subtab.
2. Select the MAC address of the AP client from the select list.
The Associated Client Status Detail page is displayed.
3. Observe the fields described in Table 99.
Status Displays the status of the AP client. The options
are:
 Associated
 Authenticated
 Disassociate - The AP client is not
associated with the access point.
Network Time Displays the time that has passed since the AP
client was authenticated.
Table 98. Associated Client Status Summary (Continued)
Field Description
Table 99. Associated Client Status Detail
Field Description
SSID Displays the SSID that the AP client is associated
with.
BSSID Displays the MAC address of the VAP that the AP
client is associated with.
AP MAC
Address Displays the MAC address of the home access
point of the AP client.