Allied Telesis AT-UWC Series - Manual (Page 56)

AT-UWC WLAN Controller Web GUI User’s Guide
56
3. If you want to refresh the display, click Refresh.
Searching a MAC
Address
To search a MAC address from the forwarding database, do the following:
1. From the Navigation pane, go to System > System > Forwarding
Database > Search.
The Forwarding Database Search page is displayed as shown in
Figure 34 on page 55.
2. Select one of the following filtering options from the select list:
 All: Specifies the search in the entire forwarding database.
 Learned: Specifies the search in the MAC addresses with the
Learned status.
3. Enter the combination of a VLAN ID and a MAC address in
hexadecimal in the following format:
xx:xx:xx:xx:xx:xx:xx:xx
4. Click Search.
The result is displayed.
Status Indicates the status of the MAC address entry.
The options are:
 Learned: The MAC address was learned
from received frames.
 Management: Indicates that MAC
address is of the WLAN Controller.
Table 7. Forwarding Database (Continued)
Field Description