Allied Telesis AT-UWC Series - Manual (Page 313)

Chapter 5: Wireless LAN
313
3. If you want to refresh the display, click Refresh.
Adding an AP
Client to the
Known Client
List
To add an AP client that the WLAN Controller manages, do the following:
Note
To add a list of AP clients using a CVS file, go to “Adding AP Clients
Using CSV File” on page 314.
1. From the Navigation pane, go to WLAN > Advanced Configuration >
Known Client.
The Known Client Summary page is displayed as shown in Figure 154
on page 312.
2. Specify the MAC address of an AP client in the text box.
3. Click Add.
The Known Client Configuration page is displayed as shown in Figure
155 on page 314.
Authentication
Action Displays the authentication action that the WLAN
Controller takes.The options are:
 Grant - Allows the network access.
 Deny - Denies the network access.
 Global Action - The action depends upon
the setting of The MAC Authentication Mode
in the Wireless Global Configuration. See
“WLAN Advanced Configuration > Global”
on page 302.
The WLAN Controller takes the action when MAC
authentication is enabled. See “WLAN Advanced
Configuration > Networks” on page 316.
Table 132. Known Client Summary (Continued)
Field Description