Allied Telesis AT-UWC Series - Manual (Page 355)

Chapter 5: Wireless LAN
355
Table 146. WIDS Client Configuration
Field Description
Known Client
Database Test Displays whether or not detecting an AP client on
the Known Client list with the Deny setting or on
the blacklist.
Configured
Authentication
Rate Test Enables or disables detecting an AP client that
exceeds the maximum transmission rate when
sending 802.11 Authentication messages.
Configured Probe
Requests Rate Test Enables or disables detecting an AP client that
exceeds the maximum rate when sending probe
requests.
Configured De-
Authentication
Requests Rate Test Enables or disables detecting an AP client that
exceeds the maximum rate when sending De-
Authentication requests.
Maximum
Authentication
Failure Test Enables or disables detecting an AP client that
exceeds the limit of authentication failure.
Authentication with
Unknown AP Test Enables or disables detecting an AP client on the
Known Client list that is connected to the unknown
AP.
Client Threat
Mitigation Enables or disables sending De-Authentication
requests to an AP client when the AP client on the
Known Client connects to an unknown AP.
Authentication with Unknown AP Test must be
enabled.
Known Client
Database Lookup
Method Specifies the type of the Known Client database:
Local or RADIUS.
Known Client
Database RADIUS
Server Name Specifies the name of the RADIUS server to refer
to the Known Client database when the Known
Client Database Lookup Method is selected
RADIUS.
Rogue Detected
Trap Interval
(seconds) Specifies the time interval that SNMP traps with
Rogue information are sent. When 0 is set, no
SNMP traps are sent.
De-Authentication
Requests
Threshold Interval
(seconds) Specifies the time interval to count the number of
De-Authentication requests.