Allied Telesis AT-UWC Series - Manual (Page 15)

Chapter 1: Getting Started
15
Preparing the Management Workstation
To access the AT-UWC WLAN Controller, you must have a management
workstation.
The management workstation is a computer that you use to manage the
AT-UWC WLAN Controller. The management workstation must be
connected to the network that the AT-UWC WLAN Controller server
belongs to. See an example shown in Figure 1.
Figure 1. AT-UWC WLAN Controller and Management Workstation
The AT-UWC WLAN Controller server has the following default IP address
and subnet mask assigned:
192.168.1.1/255.255.255.0
For the first time you access the AT-UWC WLAN Controller, your
management workstation must have an IP address in the following range:
192.168.1.2 to 192.168.1.254
Note
To change the IP address of the management workstation, see
“Changing the IP Address” on page 21.