Allied Telesis AT-UWC Series - Manual (Page 342)

AT-UWC WLAN Controller Web GUI User’s Guide
342
Access Point Profile QoS Configuration
From the Access Point Profile Quality of Service (QoS) Configuration
page, you can configure QoS on the access point profile. The QoS
settings are applied to the access points, not to the AP clients.
To configure QoS on the access point profile, do the following:
1. From the Navigation pane, go to WLAN > Advanced Configuration >
AP Profiles.
The Access Point Profile List page is displayed as shown in Figure 161
on page 325.
2. Take one of the following actions:
 “Viewing and Adding Access Point Profiles” on page 325
 “Copying An Access Point Profile” on page 326
 “Modifying An Access Point Profile” on page 327
The Access Points Profile Global Configuration page is displayed as
shown in Figure 162 on page 328.
3. Click the QoS tab.
The Access Points Profile QoS Configuration page is displayed as
shown in Figure 165 on page 343.