Allied Telesis AT-UWC Series - Manual (Page 285)

Chapter 5: Wireless LAN
285
3. Click the following buttons as needed:
 Delete — Deletes all the AP client entires from the Detected Client
list.
 Delete ALL — Deletes all the AP client entires from the Detected
Client list.
 Acknowledge All Rogues — Clears the classification of all the
rogue AP clients.
 Refresh — Refreshes the display on this page.
Viewing a
Detected AP
Client
To view the detailed information about the detected AP client, do the
following:
1. From the Navigation pane, go to WLAN > Intrusion Detection >
Detected Clients.
The Detected Client Status page is displayed as shown in Figure 143
on page 284.
2. Click a MAC address from the AP client on the list.
The Detected Client Status Detail page is displayed as shown in Figure
144 on page 286.
Client Status Displays the status of the AP client. The options
are:
 Authenticated
 Detected - Not authenticated, but not
classified as rogue.
 Black-Listed - Access is denied because
the AP client is on the MAC Authentication
Black-List.
 Rogue - The AP client is classified as a
threat by WIDS.
Age Displays the time period since the AP client was
updated on the Detected Client list last time.
Create Time Displays the time period since the AP client is
added to the Detected Client list for the first time.
Table 118. Detected Client Status (Continued)
Field Description