Allied Telesis AT-UWC Series - Manual (Page 236)

AT-UWC WLAN Controller Web GUI User’s Guide
236
4. Click the following buttons as needed:
 Reset — Restarts the access point.
When the AP profile is modified, you must restart the access points
to apply the change.
 Disassociate Clients — Disconnects the AP clients from the
access point.
 Refresh — Refreshes the display on this page.
Viewing the
Detailed Status of
Radio
To view the radio information about each access point, do the following:
1. From the Navigation pane, go to WLAN > Status/Statistics > Managed
AP and clicked the Radio Detail subtab.
The Managed Access Point Radio Status Detail page is displayed as
shown in Figure 122 on page 237.
Controller IP
Address Displays the IP address of the WLAN Controller that
manages the access point.
Profile Displays the AP profile that applied to the access point.
Discovery
Reason Displays the reason why the access point was
discovered.
 IP Poll Received - The WLAN Controller polled
and discovered the access point.
 Controller IP Configured - The access point has
the IP address of the WLAN Controller.
 Controller IP DHCP - The access point obtained
the IP address of he WLAN Controller through
DHCP option 43.
 L2 Poll Received - The WLAN Controller
discovered the access point with the L2 VLAN
discover method.
Authenticated
Clients Displays the number of AP clients that were
authenticated by the access point.
Age Displays the time period since the access point
connected to the WLAN Controller.
Table 85. Managed Access Point Status (Detail) (Continued)
Field Description