Allied Telesis AT-UWC Series - Manual (Page 85)

Chapter 2: System
85
Erase Startup Configuration File
From the Erase Startup Configuration File page, you can delete the startup
configuration file stored in the WLAN Controller. The startup configuration
file is a file that includes the current saved settings, which the WLAN
Controller loads when it reboots.
Guidelines for
Erasing the
Startup
Configuration
File
Here are the guidelines for erasing the startup configuration file:
 The WLAN Controller keeps operating based on the settings on the
running configuration file unless the system resets.
 Licenses are not deleted.
 The image files downloaded from “Network Visualization
Downloaded Image,” are not deleted.
Deleting the
Startup
Configuration
File
To delete the startup configuration file, do the following:
1. From the Navigation pane, go to System > System Utilities > Erase
Startup Configuration File.
The Erase Startup Configuration File page is displayed as shown in
Figure 50.
Figure 50. Erase Startup Configuration File Page
2. Click Erase.
The Confirm Erase Startup Configuration File page is displayed.