Allied Telesis AT-UWC Series - Manual (Page 146)

AT-UWC WLAN Controller Web GUI User’s Guide
146
CP Web Customization
From the CP Web Customization page, you can customize the web pages
to be displayed to the browser of AP clients. When the AP client sends the
first HTTP or HTTPS packet, Captive Portal directs the AP client to the
authentication page in the specified language.
You can set the global parameters and four web pages:
 Global Parameter
 Authentication page
 Welcome page
 Logout page
 Logout Success page
Note
Total size of images that are send to AP clients is up to10 Mbytes.
To customize the settings of the authentication page in the specific
language, do the following:
1. From the Navigation pane, go to Security > Captive Portal > CP
Configuration.
The CP Configuration page is displayed as shown in Figure 79 on
page 140.
2. Perform one of the following steps.
 To add a new CP profile, click Add.
 To modify an existing CP profile, click the name of a CP profile that
you want to modify.
The CP Configuration page is displayed as shown in Figure 80 on
page 142.
3. Click the language subtab.
4. The CP Web Customization (Global Parameter) page is displayed as
shown in Figure 81 on page 147.