Allied Telesis AT-UWC Series - Manual (Page 139)

Chapter 4: Security
139
3. Click the following buttons as needed:
 Refresh — Refreshes the display on this page.
 Submit — Makes the changes effective and saves them to the
running configuration file.
Note
To save your changes to the startup configuration file, see “Save All
Applied Changes” on page 39.
CP Global Disable
Reason Displays the reason when Captive Portal is disabled
on the WLAN Controller. The options are:
 Administrator Disabled
 No IPv4 Address
 Routing Enabled, but no IPv4 routing
interface
 None - None of the above reasons is
applicable.
Additional HTTP
Port Specifies the number of other HTTP ports that are
addition to port 80. The value 0 indicates that no
additional HTTP port is specified.
The authentication page can be displayed only using
TCP port 80.
Additional HTTP
Secure Port Specifies the number of other HTTPS ports that are
addition to port 443. The value 0 indicates that no
additional HTTPS port is specified.
Authentication can be done only using TCP port 443.
Peer Controller
Statistics Reporting
Interval (secs) Specifies the time interval in seconds that the WLAN
Controller sends statistics information about
authenticated AP clients to the cluster controllers
when clustering is enabled on the WLAN Controller.
Table 38. CP Global Configuration (Continued)
Field Description